符合CCSDS标准的RS(255,223)码译码器的FPGA实现及其性能测试

RS（Reed-Solomon)码是差错控制领域中一种性能优异的非二进制分组循环码，由于它具有很强的随机错误和突发错误的纠错能力，被CCSDS，NASA，ESA等空间组织接受，广泛应用于深空探测中．本文采用改进的Berlekamp算法，用FPGA实现了符合CCSDS标准的RS(255，223)码译码器；介绍了该译码器的实现流程、性能测试方法和基于PCI总线接口的测试平台；给出了测试结果，并且对理论上RS(255，223)译码器的误码性能与实际测试的误码率结果进行了比较和分析．验证结果证明该译码器能工作在400Mbps以上的码率，使用FPGA资源180000门，译码效果与理论上译码效果一致．     

状态监控与故障诊断聚类分析法

概要阐释聚类分析方法及其技术要点，对用聚类分析进行状态监控和故障诊断作了探索性研究，提出用８种系统聚类法进行状态监控和故障诊断。     

A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.     

火箭橇体进水现象研究

在考核过载承受能力的火箭橇试验后,橇体内发现有水,从空气动力学的角度,对火箭橇体进水现象进行了初步分析,并利用FLUENT软件对进水原因进行了初步研究,通过分析,发现结构在穿越跨音速阶段时,由于内外压差的变化将导致内部或外部产生水汽。该发现为结构设计提供有益的建议。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

一种主动悬架式火星车稳定裕度优化控制策略

针对火星车在非结构化环境下行驶存在的稳定性不足而导致倾覆的风险，提出针对一种六轮主动悬架式火星车的稳定裕度优化控制方法。首先，考虑了火星车悬架机构调整过程中车轮与接触地面滑移和侧倾等运动关系，建立和完善了六轮主动悬架式火星车行驶的运动学模型。然后，以火星车夹角调整机构角度为变量，推导火星车在非结构环境下的稳定裕度模型。之后，使用内点法求解火星车稳定裕度的最优解，并获得期望的夹角调整机构关节角度。在此基础上，对夹角调整机构的关节角度进行规划和控制，实现火星车悬架机构构型的调整，从而提高火星车在非结构化环境下行驶的稳定裕度。最后，对火星车稳定裕度优化控制策略的有效性进行仿真验证，结果表明，所提出的控制方法可有效提高火星车在非结构化环境下行驶的稳定裕度。     

A new structural reliability index based on uncertainty theory

The classical probabilistic reliability theory and fuzzy reliability theory cannot directly measure the uncertainty of structural reliability with uncertain variables,i.e.,subjective random and fuzzy variables.In order to simultaneously satisfy the duality of randomness and subadditivity of fuzziness in the reliability problem,a new quantification method for the reliability of structures is presented based on uncertainty theory,and an uncertainty-theory-based perspective of classical Cornell reliability index is explored.In this paper,by introducing the uncertainty theory,we adopt the uncertain measure to quantify the reliability of structures for the subjective probability or fuzzy variables,instead of probabilistic and possibilistic measures.We utilize uncertain variables to uniformly represent the subjective random and fuzzy parameters,based on which we derive solutions to analyze the uncertainty reliability of structures with uncertainty distributions.Moreover,we propose the Cornell uncertainty reliability index based on the uncertain expected value and variance.Experimental results on three numerical applications demonstrate the validity of the proposed method.     

现代高效刀具发展特点和产业化途径

现代高效刀具和工具工业的发展特点 1 现代高效刀具的内涵 现代高效刀具是相对传统标准刀具而言的.传统的工具工业以生产供应标准化、通用化的刀具为基本特点.长期以来,制造业有一种共识:除了少量特殊需要,尽量选用标准刀具.标准刀具虽然性能不是最优,但因经济实用而被广泛接受.但到20多年前,这种观念在发达国家开始发生变化.     

航天器安全防护保障探讨

把对航天器安全的威胁分为硬和软两大类，分析了对航天器产生威胁的类别，以及为保证航天器安全而需要采取的措施。介绍了研究的内容，需要建设的空间信息对抗系统和空间信息探测网。